Ni 2.25 Cr 16.0 Mn 8.0 C 0.030 Si 0.3 N 0.23 S 0.030 P 0.040
High Performance Alloys stocks and
produces this grade in the following forms: Sheet, plate and coil.
Overview
Corrosion and abrasion resistant, tough and durable, NITRONIC 30 is the stainless steel for your abrasive needs.
Ball mill tests have shown that many application standards, such as AR 500 suffer six to seven times as much metal loss as NITRONIC 30.
Economical, low alloy, corrosion resistant, abrasion resistant stainless steel.
This is a popular replacement for carbon steel, due to the resistance to outside weather conditions.
Characteristics
NITRONIC 30 is highly impact-resistant, which makes it ideal for a range of heavy duty applications.
Already proven to be the endurance leader in coal handling equipment and prep plants, NITRONIC 30 will last up to twice as long as its nearest competitor.
Selecting the best material for the job goes well beyond the initial price of the material.
The maintenance, downtime and replacement costs associated with poor material performance can wreak havoc with
production time and budget. NITRONIC 30 was engineered with these realities in mind.
NITRONIC® 30 is an excellent grade to replace AR400 as an abrasion steel, abrasion corrosion resistant, abrasion stainless.
Allows fabrication including bending, as well as welding. Primarily used for abrasion resistance to coal, gravel and other substrates.
Truck bed and bucket liners are major applications, as well as chutes and gates.
PLEASE NOTE: Abrasive wear is NOT the same as metal-to-metal wear, or galling.
Abrasive wear is caused by objects that slide uncontinuously across a surface. Abrasion is tearing or shearing of the surface, and
is best remedied using a low cost material. Corrosion is also a factor in abrasion, as it can lead to faster failure by allowing larger pieces to flake.
If you are experiencing these type of failures, see
NITRONIC 60, or
HPAlloys Cobalt 6B.
Applications
- Coal Buckets
- Hoppers
- Distributors
- Ore Separators
- Barge Liners
- Refrigerated Trucks
- Food Processing Equipment
- Bulk Solid Handling Equipment
- Sewage Treatment Structures
- Screens Hoppers
- Trailer Bedliners
- Chutes
- Truck/Bus Frames
Chemistry
Chemical Requirements |
|
Ni |
Cr |
Mn |
C |
Si |
N |
S |
Max |
3.00 |
17.00 |
17.0 |
0.030 |
1.00 |
0.30 |
0.030 |
Min |
1.50 |
15.00 |
15.0 |
|
|
0.15 |
|
Tensile Data
Mechanical Property Requirements |
|
Ultimate Tensile, min. |
Yield Strength (0.2% OS) min. |
Elong. in 2 in., or 50mm, min., % |
R/A |
Hardness, max. |
Min |
95 KSi |
48 KSi |
35 |
|
|
Max |
|
|
|
|
241 Brinell |
Min |
655 MPa |
330 MPa |
|
|
|
Max |
|
|
|
|
100 Rockwell B |
Specifications
Form |
Standard |
Metal Type |
UNS S20400 |
Flat Bar |
ASTM A666 |
Cold Worked Bars |
|
Wire |
|
Sheet |
ASTM A240 ASTM A666 |
Plate |
ASTM A240 ASTM A666 |
Foil |
ASTM A240 ASTM A666 |
Fitting |
|
Welding Tube |
|
Forging |
|
Weld Wire |
|
Weld Electrode |
|
Din |
|
Machining
MACHINING DATA |
Carbide tools are suggested
for rates better than 50% of Type 304. |
Machining Type |
Suggested starting rates are: |
Single Point turning : |
Roughing - 0.15" depth, 0.015"/rev feed -175 SFM
Finishing - 0.025" depth, 0.007"/rev feed - 200 SFM |
Drilling : |
1/4" Dia hole - 0.004"/rev feed - 60 SFM
1/2" Dia hole - 0.007"/rev feed - 60 SFM
3/4" Dia hole - 0.010"/rev feed - 60 SFM |
Reaming : |
Feed - same as drilling - 100 SFM |
Side and Slot Milling : |
Roughing - 0.25" depth - 0.007"/tooth feed - 125SFM
Finishing - 0.050" depth - 0.009"/tooth feed - 140SFM |
These rates are for carbide tools,
Type C-2 for roughing, drilling and reaming.
Type C-3 for finishing. |
NITRONIC® is a registered trademark of AK Steel